Zibo Great Sailing Light Industrial Products Co., Ltd. is one of the leading manufacturers and suppliers of straight-sided double-wall glass french press in China. With abundant experience, we warmly welcome you to buy bulk customized straight-sided double-wall glass french press from our factory. If you have any enquiry about cooperation, please feel free to email us.
Straight-Sided Double-Wall Glass French Press
A clear, straight-sided French press with a glass handle and a mesh plunger. The glass body lets you see the coffee as it brews, and the same clean silhouette runs through all three sizes.
Start with the serving size you have in mind. The 350 mL model gives you a smaller format for a single serving, the 650 mL sits in the middle of the range, and the 1,000 mL gives you more room when several people are sharing.
What sits above the glass
From the side, you can see the flat lid, the dark band beneath it and the knob above it. The center rod connects the knob to the round mesh assembly inside.
If the lid finish matters to your range, send a reference with the size you are sourcing so the sample can be reviewed against it.
Look at the base
The inner vessel holds the coffee. Below it, a clear gap separates its base from the outer wall. The close-up shows where the two layers sit.
For carton development, use the outside measurements of the assembled sample, including the handle and knob.
Three sizes in one range
The catalog lists 350, 650 and 1,000 mL for the straight-sided series. These are the listed model capacities. Ask for the measured brimful or usable fill volume if either figure is important to your program.
Check the size you plan to buy. Height, handle projection and carton dimensions are best recorded for each option.
Two details worth checking in hand
The clear loop handle sits opposite the small glass pouring lip. On a sample, check the grip, the lid fit and the pour with the amount of coffee you plan to serve.
For a café rollout, use the same sample to check tray space and clearance at your service station.
Four things to check on the sample
Empty the grounds and rinse the glass vessel and mesh with warm water.
Ask for the care instructions for your selected configuration before printing them on packaging.
A finish sample or color reference, if applicable.
The handle and lid details you would like reviewed.
Your artwork and intended marking location, if applicable.
The box format and destination market.
From coffee counter to housewares range
A café group can start with the portion it serves at the table and choose a press around that. A housewares buyer can build a range around the same silhouette, then decide which sizes to carry and how to pack each one.
What to settle before production
Start with the assembled press
A carton needs to account for the handle, spout and plunger knob as well as the glass body. Tell us whether you need bulk packing or an individual box and share any packing requirements with your RFQ.
Questions buyers ask before ordering
The catalog lists 350, 650 and 1,000 mL. Tell us which size you need and whether your specification calls for brimful capacity or a usable fill volume.
They are shown as individual model options in one range. Send the quantity you need for each size when requesting a quote.
Send the sizes, quantities and any finish or packing requirements. Ask for the minimum for each configuration on the quotation.
The press has a round mesh filter on a center rod. Include the grade or test documentation your project requires so the exact assembly can be reviewed.
Send the finish reference, preferred marking location or box brief with your quantities. Feasibility depends on the selected configuration and order.
Let the press cool and rinse out the glass and mesh after use. For dishwasher use or printed care instructions, request the care guidance for the final configuration.
Check the assembled dimensions, lid fit, handle clearance and care wording against the approved sample. Make sure the model and capacity statement on the box match that sample.
Yes. Include the models, quantities, destination and packing needs so sample terms and production timing can be quoted for your project.
Hot Tags: Wholesale Christmas ornament glass cups for cold drinks. Customize size and color, specify the lid and straw, and request a quote by version
Technical parameters
Catalog sizes are listed below. Confirm the measurement basis and assembled sample dimensions where required for your order.
Send your quantities by size, destination market and packing brief. Include any required capacity measurement or material documentation so these can be checked against the sample.
Email: glassware@zgsglass.com
WhatsApp / WeChat: +86 13105330788
Zibo Dafan Light Industrial Products Co., Ltd. · Zibo, Shandong, China
Sample terms, pack details and lead time are confirmed on the quotation.

















