200 Ml Glass Storage Jars, Set Of Four With PP Lids

200 Ml Glass Storage Jars, Set Of Four With PP Lids
Product Introduction:
200 ml glass storage jars, four to a set, with snap-on PP lids.
Six body patterns and four lid colors on one 7.9 cm opening.
MOQ 1,000 sets, packed in palletized divider cartons.
Send Inquiry
Add To Inquiry
Description
Technical Parameters

Zibo Great Sailing Light Industrial Products Co., Ltd. is one of the leading manufacturers and suppliers of 200 ml glass storage jars, set of four with pp lids in China. With abundant experience, we warmly welcome you to buy bulk customized 200 ml glass storage jars, set of four with pp lids from our factory. If you have any enquiry about cooperation, please feel free to email us.

 

Glass Food Storage

200 ml Glass Storage Jars, Set of Four

200 ml per jar
PP lid
MOQ 1,000 sets
A set of four 200 ml glass storage jars with pastel PP lids, stacked two by two on a white surface

Four jars to a set, 200 ml each. The body stays the same across the range. What changes is the pattern pressed into it.

Machine-made soda-lime glass, 6.4 cm tall, 7.9 cm across the mouth, 6.5 cm at the foot. The lid is polypropylene and comes off with a thumb. We hold six patterns and four lid colors; a set ships as one pattern with one lid color, so your case count does not move when the pattern does.

Change the pattern, nothing else moves
Same lid, same carton, same jars per case. Only the pressed surface is different, which is the whole reason for running six of them on one body.
A jar is a portion
200 ml takes a handful of nuts, a top-up of spice, one cup of yogurt. Four of them is a shelf or a gift box, not a bulk bin.
The foot is narrower than the mouth
6.5 cm against 7.9 cm. Set one jar on the next and the foot drops into the lid, which is why a stack of four stays a stack of four.
 
Volume
200 ml
Per jar. The set holds 800 ml.
Mouth
Ø 7.9 cm
The lid and the carton are built around this.
Height
6.4 cm
Body only. The lid sits above this.
 
Lid

How it comes off

There is a tab at the edge of the lid. Push it with a thumb and the lid tilts away. No nail under the rim, no levering at the joint. On a jar that gets opened twice a day, that is the difference between a lid that lasts and one that splits at the edge within the first year.

Inside there is no gasket, so do not treat it as a seal. Dry goods, the fridge, a pantry shelf: fine. Turn a filled jar on its side and liquid will find the rim. If the program needs a closure for transport, ask for the gasketed lid and we quote that instead of this one.

Close view of the polypropylene lid being lifted off the glass jar by its molded thumb tab
 
Two stacks of four glass storage jars on a pantry shelf, each jar seated inside the lid recess of the one below
Stacking

Why four high is still stable

The foot measures 6.5 cm, the mouth 7.9 cm. That gap of 1.4 cm is what holds a column together: the foot of the upper jar sits down inside the lid recess of the lower one, so the stack does not walk sideways when a customer lifts the second jar out of the middle.

On a shelf, four jars occupy the footprint of one. In a cupboard they stack four high instead of spreading across the drawer. The step is formed with the body rather than added as a separate foot ring, so a dishwasher cycle will not work it loose.

 
Pattern

Six surfaces, one body

Dot, vertical rib, horizontal rib, arch, spiral and crystal cut. Each is pressed into the glass while it is still soft, so the texture you feel is the wall itself. Nothing has been printed, filmed or coated on top of it to come away after a year of washing.

Because all six sit on the same body, they also share the lid and the carton. A shop can carry the whole family without six sets of packaging, and a customer who bought the ribbed jar can come back for the spiral and get the same jar in the hand.

Six 200 ml jars in a row showing dot, vertical rib, horizontal rib, arch, spiral and crystal cut patterns
 
Three jars with exterior spray color in yellow, pink and blue, one with the lid off showing the clear glass inside
Color

Where the color sits

A tinted jar is sprayed on the outside only. The wall inside stays clear soda-lime glass, lead-free, and that inner wall is the surface the food touches. The color is a finishing step applied to the exterior, and it stops there.

Lids run in yellow, blue, pink and cream. One pattern takes one lid color per set, which keeps the barcode and the case simple. If your range is built as a color story rather than as single SKUs, tell us the mix and we quote the picking and the packing on top of the goods.

 
Tech notes

Four things worth writing down

Body
Soda-lime, machine-made. 200 ml, 6.4 cm tall, 7.9 cm mouth, 6.5 cm foot.
Lid
PP, snap-on, tab at the edge. No gasket inside. Yellow, blue, pink, cream.
Surface
Six patterns pressed in during forming. Tinted bodies are sprayed outside only.
Packing
Palletized cartons, divider cells. Retail packing built to your spec.
 
Care
Washing it
Dishwasher, jar and lid together. Microwave, no.

Dry the lid upside down so water does not sit in the recess.

On a tinted body, use a soft cloth. A scourer is the one thing that dulls the spray.
Customization
What you can change
Pattern: any of the six.
Lid color: yellow, blue, pink or cream.
Body: sprayed to a sample you send.
Logo: on the lid or on the carton.
Cartons: color box, sleeve, insert card, shrink set.
 
Application

Who buys a four-jar set

Housewares retail, hamper and gift programs, cafes that prep before service, and the suppliers who put together favors and sample sets. Mostly it is bought by the box, not by the jar.

Salt, spice, seeds, loose tea
Nuts and dried fruit out on a shop counter
Yogurt, chia, desserts portioned for a cafe fridge
Prepped garlic, zest and herbs within reach of the pass
Hampers built around four matching jars
Wedding and event favors, boxed as a set
Four glass storage jars on a kitchen shelf holding salt, spice, nuts and dried fruit
 
Dishwasher yes, microwave no
Both parts go through a domestic dishwasher. Neither is specified for a microwave, and a jar that has been through one is not something we can take back as a defect.
It snaps on, it does not seal
No gasket under this lid. Enough for dry goods and the fridge, not enough for a liquid in transit. For that, order the gasketed lid.
 
Order timeline

From drawing to pallet

48 hours
3D drawing
Your pattern and lid color laid on the body, sent back before we sample.
7 to 10 days
Physical sample
Free, freight collect, with the lid color you picked.
30 to 60 days
Mass production
Counted from deposit and artwork approval.
 
Bulk carton with divider cells holding four glass jars per set, on a pallet
Packing

One jar to a cell

Bulk goes out as palletized cartons with divider cells, one jar in each, so nothing touches anything else inside the case and the lid colors stay sorted by set. How the pallet is built depends on how your warehouse unloads, so we agree it with you rather than applying a fixed pattern.

Retail packing to your spec: color box, sleeve, insert card, shrink set
Case size and pallet count taken from your carton drawing
Packed breakage under 0.3%
Inspection record and packing list with every lot
 
FAQ

Questions we get before an order

Is the minimum on jars or on sets?

A: Sets. 1,000 of them, which is 4,000 jars, and it is counted per pattern and per lid color because a set is one pattern with one lid color. Two patterns is two minimums; they do not add up to one. Colored bodies and custom cartons sit on the same quotation.

Can we mix patterns in one set?

A: Not in the standard carton. Mixing means hand-picking, and hand-picking is a cost line, so we quote it separately rather than hiding it in the jar price. Send the mix you want and we will price it.

Does the lid keep liquid in?

A: No gasket, so no. It holds dry goods and keeps smells where they belong. Lay a full jar on its side and it will seep. If the goods need to travel wet, take the gasketed lid.

Dishwasher or microwave?

A: Dishwasher, both parts, yes. Microwave, no: PP lid, soda-lime body, and neither is built for that heat. The same goes for the oven and for taking it from the freezer into a hot oven.

Is the inside of a tinted jar coated?

A: No. The spray goes on the outside. Inside and at the rim it is plain glass, lead-free, so what the food meets is glass with nothing over it.

Can you supply a food-contact report?

A: If your market asks for one, yes. Tell us the standard and the market on the order sheet; we have the testing done against that standard and the report is issued before production starts. It is quoted with the goods rather than promised in advance.

How does a bulk order arrive?

A: On pallets, in divider-cell cartons, one jar to a cell. Jars per case and cases per pallet come off your carton drawing. Retail packaging is a separate line on the quotation and is made to your artwork.

Can the jar carry our logo?

A: The lid and the carton take one easily. The body is harder: a print needs a flat, pattern-free area, and not every pattern gives you one. Send the artwork, we check which of the six can carry it, and you see the layout on the real profile before anything is printed.

 

Hot Tags: 200 ml glass storage jars, set of four with pp lids, China, manufacturers, customized

Specification

Technical parameters

Everything below is measured on the sample, not estimated. Where a figure depends on your packaging or your market, it is set on the order sheet.

Description
200 ml Glass Storage Jars, Set of Four, with PP Lids
Material
Soda-lime glass, lead-free; polypropylene lid
Size
Mouth Ø 7.9 cm × base Ø 6.5 cm × body height 6.4 cm, lid excluded
Volume
200 ml per jar; 800 ml per set
Set
Four jars, one pattern, one lid color
Lid
Polypropylene, snap-on with a thumb tab, no gasket. Yellow, blue, pink, cream
Surface
Six patterns pressed in during forming: dot, vertical rib, horizontal rib, arch, spiral, crystal cut
Color
Exterior spray on tinted bodies; the inside wall stays clear glass
Use limits
Dishwasher safe, jar and lid. Not microwave safe, not oven safe
Compliance scope
Glass and PP are food-contact materials; glass is lead-free. Testing to the standard your market nominates is arranged against the order and reported before production; scope stated at quote
MOQ
1,000 sets, counted per pattern and per lid color. A set is four jars
Production lead time
30 to 60 days after deposit and artwork approval
Sample
3D drawing in 48 hours; physical sample in 7 to 10 business days, free of charge, freight collect
Payment
T/T or L/C
Incoterms
FOB standard; EXW and CIF on request
Port
Qingdao
Customization
Pattern from the six on file; lid color; exterior spray to a sample; logo on lid or carton; retail packaging to artwork
Packaging
Palletized cartons with divider cells, one jar per cell; case size and pallet count against your carton drawing; retail packaging to specification
Quantity tolerance
±3% on the ordered quantity
Per-lot inspection
Dimensions, rim flatness, pattern definition, annealing, lid fit and decoration, recorded per lot
 
Quote
Tell us the pattern, the lid color and the carton

Send the pattern you want, the lid color, the market and the packaging format. You get a price, a 3D layout on the body and a lead time, in one reply.

Email: glassware@zgsglass.com
WhatsApp / WeChat: +86 13105330788
Zibo Dafan Light Industrial Products Co., Ltd. · Zibo, Shandong, China

We answer seven days a week, 24 hours. Anything still open is confirmed on the order sheet.

Send Inquiry